If you have any needs, please contact us
✕
banner-news

News

Can a photovoltaic greenhouse also be used as a photography studio? How was a 9.5-meter span on the top floor of an 18-story building achieved?

日历图标2026·09·27 评论图标138

The idea of building a photography studio under the existing solar panels sounds quite unusual. For homeowners, "installing solar panels" and "building a photography studio" are two completely different things: the former requires stability, while the latter requires space.

However, when it comes to the same rooftop, these two requirements become intertwined—stability, wind resistance, fewer pillars, large span, and controllable budget. The 18-story, 9.5-meter-span sunroom in Foshan Hengyi Science and Technology Park was born out of this "contradiction".

I. Project Overview

Located in Nanhai District, Foshan City, Guangdong Province, this project is a distributed photovoltaic (PV) solar greenhouse project on the concrete flat roof of a science and technology industrial park. The park itself is a comprehensive science and technology industrial park, encompassing multiple business formats including technology incubation, light manufacturing, and office space. Although the installed capacity is only 93.1 kW, the project has extremely high requirements for its support structure. It utilizes Yuanguangbao's 115 truss system and 8-block design, and installs 630W of high-efficiency PV modules. This not only injects clean electricity into the park's roof but also provides a concrete example of the integrated utilization of "PV + functional space + safety."

1.png

Figure 1 | Aerial panoramic view of the completed rooftop sunshade project of Foshan Hengyi Science and Technology Park

The client's requirements list included a particularly noteworthy line: "The space beneath the shed must be used as a photography studio, and there cannot be multiple pillars obstructing the view." In technical terms, this means five requirements must be met simultaneously:

(1) The space should be open: a photography studio with few columns and a large span should be built under the studio. The camera position, light track and personnel movement should not be blocked by the columns. The span should be large enough, the height of the studio should be appropriate, and the number of columns in the middle should be as small as possible.

(2) The roof must be undamaged: the waterproof layer must not be broken, the photovoltaic shed must not be damaged at the expense of the roof waterproofing, and the original waterproof layer of the concrete flat roof must be completely preserved.

(3) Cost must be controllable: Photovoltaics is an auxiliary project, not the main investment budget, so the plan must be cost-effective under the premise of structural safety. This project was implemented with a high cost-performance cooperation plan . It is not "installing a photovoltaic system", but "building a photography studio on my roof and installing photovoltaics on it".

II . Challenges

9.png

Figure 2 | Installation site of BIPV photovoltaic sunshade on high-rise roof

1.18-story -high wind-resistant design challenge

Foshan is located on the South China coast and is an area frequently affected by typhoons; the roof of this project is located on the 18th floor of the building . The higher the altitude, the greater the wind pressure variation coefficient—under the same weather conditions, the wind load on the 18th floor roof will be significantly greater than that on the lower floors.

What's even more problematic is that the tent itself has to "catch the wind": with a 9.5- meter span and 3-meter purlin width, the windward area is considerable; beneath the tent is a spacious photography studio, making the wind-catching effect of the entire tent structure more pronounced than that of a roof-mounted array. Once the wind suction exceeds the locking capacity of the pressure blocks, the components will be the first to fail—being lifted, torn, or even completely disengaged.

There's a general consensus in the industry regarding wind resistance: the more pressure blocks and the larger the contact area, the stronger the module's ability to withstand wind. However, the problem lies precisely in the layout—traditional array-style support structures, with modules arranged vertically and only four pressure block points, simply cannot be structurally modified to increase the density according to wind pressure. In other words, array-style layouts are inherently unsuitable for scenarios with high wind pressure in high-rise buildings—to solve this problem, the way the modules are laid out must be completely changed.

2. Challenges in Roof Layout and Waterproofing Management

A 9.5- meter span , coupled with the studio's requirement for minimal columns, means the truss layout must maximize the span of each section and minimize mid-span columns. This imposes two counter-requirements on the support system:

Structurally , each span must be strong enough to withstand the load; simply piling up columns won't solve the problem. For roof protection , the anchoring points must be precise without damaging the original waterproofing layer. Any leakage will negatively impact the studio's shooting environment (humidity, lighting, set costs).

3. Long-term corrosion resistance and durability challenges of photovoltaic greenhouses

Foshan is located in the Lingnan humid and hot climate zone, with high annual humidity, abundant rainfall, and a long typhoon season. In this climate, the "details" of building photovoltaic greenhouses—truss joints, purlin seams, and interlocking of clamps—are the true battleground for corrosion prevention. Once a joint rusts through, the structural stability of the entire greenhouse will be compromised. Therefore, in Foshan, the claim of " lasting 25 years " is taken more seriously than just a stated figure, even more so than in arid regions.


III. Solutions

5.png

Figure 3 | Actual photo of the Yuanguangbao BIPV sunshade structure, demonstrating the proper and standardized use of rigid supports to ensure structural stability.

1. Wind-resistant design solution for 18-story high-rise buildings

In response to the typhoon-affected areas and the wind load on high-rise buildings, this project has broken down the wind-resistant design into three layers:

Structural layer: The 115 truss system supports a 9.5 -meter span. All truss, column, and purlin nodes are bolted together, resulting in high overall rigidity and a clear force transmission path. The 3-meter purlin span evenly distributes the roof load to each truss. At the same time, rigid bracing is used to ensure the stability of the structure.

Compression layer: This project is equipped with 8 compression blocks, with the long side of the component arranged parallel to the purlin, distributing the wind force to multiple locking points, resulting in less stress at a single point; the width of the compression block can be cut to fit the wind pressure - the larger the contact area, the lower the compressive stress on the frame flange;

Anchoring layer: Chemical anchoring is configured according to pull-out resistance requirements to reliably transfer wind suction to the roof structure layer without damaging the original waterproofing layer;

Steel wall thickness: The components of the 115 system have thicker walls than conventional support systems. The load-bearing key components (column base 5.00mm, positioning plate 3.0mm) are significantly thicker, while the remaining columns, diagonal braces, pressure blocks, etc., all reach 2.0mm. At the same time, the components are cold-formed thin-walled, and the high-strength steel is further enhanced by cold bending. Under the same area and material, the design strength is more than 1.5 times that of the welding process .

The strength of the configuration depends on the wind pressure. Wind resistance is calculable, configurable, and verifiable, not just based on whether it "looks sturdy."

2. Roof waterproofing and non-destructive protection solutions

This project adopts a combination of chemical anchoring and truss support:

Precise anchor point positioning. Based on the 9.5-meter span, the column positions are determined, and each column corresponds to a set of chemical anchors, with the anchor points avoiding weak points in the original waterproofing layer of the roof.

Secondary waterproofing is provided. 115 series purlins are laid above the truss , and the purlins and main beams integrate water channel functions to form an integrated structural waterproofing system.

The gaps between the lowered panels are pressed down to 3mm . The direct path of rainwater is blocked, and the small amount of water that overflows the gaps is actively diverted into the gutters.

3. Long-lasting corrosion-resistant and rust-proof structural solutions

Foshan has a hot and humid climate, requiring the truss joints to withstand high temperatures. The main materials used in this project are all zinc-aluminum-magnesium high-strength steel (S350GD-ZM275) , with a coating containing a specific magnesium element. The cut edges can self-heal and form a dense protective film , effectively locking in corrosion at its source. Combined with a fully assembled, weld-free process, the anti-corrosion coating on each component is intact and undamaged, eliminating the risk of weld corrosion. All joints are secured with bolts and matching seals . This provides a robust material guarantee for the power station's stable operation for over 25 years , requiring no painting and requiring minimal maintenance.

4.png

Figure 4 | Real shot of the Yuanguangbao 115 system

10.png

Figure 5 | Detail of the cross bracing of the Yuanguangbao sunshade column


IV. Project Implementation Results and Value

2.png

Figure 6 | A completed photovoltaic solar greenhouse in an industrial park in Foshan

The 93.1KW installed capacity was connected to the grid as scheduled, and power generation is stable; the 9.5- meter span truss and columns are firmly planted , and there are no obvious columns obstructing the interior of the studio, so the use of the photography studio is not affected .

The successful implementation of a cost-effective cooperation price – Yuanguangbao's first use of the 115 truss system is a cost verification and also a verification of the integration of "personalized solutions + mass production capabilities" .

The original waterproofing layer of the concrete roof was completely preserved, with no leaks or damage.

The 18-story-high wind-resistant structure is designed with a combination of 115 trusses and 8 pressure blocks, calculated based on the roof wind load, achieving a balance between structural safety and cost.

As a dual-function studio combining photovoltaics and a photography studio, its return structure is not simple:

(1) Green electricity benefits : Based on Foshan's industrial and commercial electricity prices and the proportion of self-consumption, the investment can be recovered within a reasonable period.

(2) Roof value enhancement: The canopy itself replaces part of the roof protection, thus extending the service life of the roof in the long term.

More noteworthy than the "delivery" itself is the fact that it validated two things: the first practical application of the 115 truss system—the design boundary of large span and few columns was brought from drawings to reality; and the wind-resistant path of horizontal row + pressure block reinforcement—the successful implementation of "clear wind pressure calculation and proper locking point allocation" on the 18th-floor typhoon roof, proving that high-rise roofs should not be a no-go zone for photovoltaic design.

Looking at the bigger picture, commercial and industrial rooftops are being redefined: they're no longer just "places to store equipment," but can become photography studios, storage spaces, or semi-outdoor meeting rooms in industrial parks—this project, though small in scale, pushes the boundaries a step further. Under the dual carbon targets, large tracts of high-rise rooftops remain vacant. Yuanguangbao wants to work with more industrial parks, property owners, and design institutes to utilize these rooftops inch by inch, moving from "being able to install" to "being able to use." This is our understanding of BIPV photovoltaic (Building Integrated Photovoltaic) systems. There are still many scenarios on commercial and industrial rooftops that "seem impossible to install." What Yuanguangbao wants to do is transform those "impossible to install" into "well-installed."


Contact us: 19854812118

Official website link: https://www.ygb11.com



Share:
Previous
Previous

Yuanguangbao made a significant appearance at the 18th World Photovoltaic Power Generation Exhibition, achieving fruitful results in on-site signings and discussions of intent.

Next
Next

Honorable Moment | Yuanguangbao Modular Prefabricated Photovoltaic Support Completes Mechanical Performance Test at Tongji University and Passes CRSA Project Fact Verification